/images/store/162/Concrete_Pour_pict.jpg/images/store/162/Concrete_Pour_Trowel_3.jpg/images/store/162/Contractor_W-Plans_6.jpg
/images/store/162/CraneSunset.jpg/images/store/162/Drywall_App_4.jpg/images/store/162/Grading_5.jpg
/images/store/162/Industrial_pict.jpg/images/store/162/Masonry_App_7.jpg/images/store/162/Masonry_pict.jpg
/images/store/162/Plywood_pict.jpg/images/store/162/Tilt-Up_Workers_App_2.jpg/images/store/162/Tilt-Up_Workers_App_4.jpg
 

Search:

Drill Bolt Brick Veneer Shear Anchoring System

358

Heckmann Building Products Inc

(click image to enlarge)
Quick Overview

    Drill Bolts™ are 1/2” thick (12.7mm) in diameter and 6.25" in length. U-Clip is 14 gage. Drill Bolt™ and U-Clip™ are Hotdip Galvanized after fabrication in compliance with ASTM A153 requirement of 1.5 oz/ft2/side (CSA CAN-A370-04 requirement of 460g/m2/side) of zinc coating.

    Complies Fully with US Building Codes:
  • Drill Bolt is attached to the stud side; the connecting screws are stressed shear.

  • Load resistance exceeds the requirements of CSA A370 and ACI 530 .

  • The total mechanical free play in the system does not exceed 1.2 mm, as required by CSA A-370.

  • The total sum of displacement under a load of 0.45 KN and mechanical free play in the system does not exceed 2.0 mm, as required by CSA A-370.

  • All parts are hot dip galvanized after fabrication per ASTM A-153, to comply with level 2 corrosion protection requirements as defined in CSA A-370.


    • Rigid Insulation Integrity Remains Uniterrupted:
  • The Drill Bolt creates a very tight penetration without disturbing adjacent sheeting and insulation.

  • U-Clip adjusts rotationally from outside to seal the penetration and positively retain the insulation in place.

  • U-Clip slot can be installed up or down to allow total vertical adjustment of 2 ¾” (70 mm).


    • Quick and Easy Installation:
  • The Drill Bolt™ installs with a power drill; the cutting point will penetrate through the sheeting and insulation from inside.

  • The Drill Bolt™ is equipped with a hex head matching the screw hex head so that only one tool is used.

  • The Drill Bolt™ is notched to indicate the depth of insertion required.
Interested in this item or want more information?

Phone:
Email:

Can't find what you want? Give us a call and we can help you find it.
Additional Information
Manufacturer: Heckmann Building Products Inc
 
Search:
Facebook GooglePlus LinkedIn StumbleUpon Twitter YouTube
 
© 2020 48WS®.com LLC. All Rights Reserved
 
Powered by 48ws.com